Filter By:
- Parts & Accessories (56)
- Pedals (117)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
$1,199.99
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,099.99
Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 326g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,099.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 320g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$699.99
Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$649.99
Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 334g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$649.99
Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 328g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$399.99
Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally RS, Rally RK or Vector™ 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.
$270.00
Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Forged Aluminum
- Spindle: Titanium
- Platform area: 664mm²
- Platform width: 67mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 200g
- Weight (pair + cleats): 450g
- Float angle: 6°
- Release angle: 13°
$270.00
The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Carbon
- Spindle: Titanium
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 145g
- Weight (pair + cleats): 340g
- Float angle: 6°
- Release angle: 13°
$249.99
Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally XC, Rally RK or Vector 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.
NOTE: This product contains pedal bodies only, spindles and electronics are not included.
In the box:
- Left and right pedal bodies (SHIMANO SPD-SL style)
- Replacement seals
- 55 mm Q-factor washers
- Battery doors
$229.99
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride.
- Weight: 220g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$200.00
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$190.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
LARGER CONTACT AREA
- The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$180.00
What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!
$180.00
Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement.
- Super slick, patent pending, spindle design
- Super low-profile design; 10mm thickness at center
- Custom undercut pins provide “clip in” style grip and easy removal
- Pedal body carriers 4 hidden pins for easy replacement of broken pins
- Tapered outside pedal edge for maximum grip and ground clearance
- Large foot platform for modern day DH, 110x108mm
$179.99
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: 6061-T6 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- adjustable pins: 6 per side for grip
- endcap: hex alloy
- cleat: premium brass cleats with shims included
- weight: 419g per pair
$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$179.99
Low And Lean
Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on.
Round And Round We Go
Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable.
Ride Don't Slide
Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck.
Look Good Ride Good
Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like.
Pedal Envy
More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):14.5
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 114 x 101
- Weight: 355g
$179.95
Based around SPD technology, DMR has engineered an extremely adaptable caged-clip system with the V-Twin. These pedals offer a number of different grip and feel options by utilizing a range of pins paired with a unique nylon "bumper" and metal shim feature.
- Large, extruded and CNC'd aluminum platform cage
- SPD-compatible design with 5 degrees of float
- Nylon 'bumper' and steel sizing shims customize platform feel
- Serviceable bearing system
- 7 tuneable pins per side (full set supplied)
- 4140 chromoly axles
- Anodized finish
- 9/16"
$169.00
Competition-oriented and customizable for refined fit, feel, and power transfer.
Details
- Durable alloy body
- Durable cast steel wings
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- Hex alloy endcap and bashguard
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
Specs
- Body Material: 6061-T6 aluminum
- Cleats: Premium brass cleats with shims included
- Endcap: Hex alloy
- Inner Bearing Type: Igus LL-glide bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Enduro cartridge bearing
- Q-factor: 52mm
- Release Angle: 15° / 20°
- Spindle Material: Forged scm 435 chromoly steel
- Spring Material: 300 series stainless steel
- Warranty: 5 years
- Weight: 320g per pair
- Wing Material: 17-4PH stainless
$169.00
The ultimate pedal for enduro riding and racing, with a longer spindle.
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for increased shoe clearance and control
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
- Adjustable Pins: 6 per side
- Body Material: 6061-T6 aluminum
- Cleats: Premium brass cleats with shims included
- Endcap: Hex alloy
- Inner Bearing Type: Igus LL-glide bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Enduro cartridge bearing
- Q-factor: 57mm
- Release Angle: 15° / 20°
- Spindle Material: Forged scm 435 chromoly steel
- Spring Material: 300 series stainless steel
- Warranty: 5 years
- Weight: 424g per pair
- Wing Material: 17-4PH stainless
$169.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm.
- Weight: 468g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Pins: 16 adjustable height grub pins per pair
- Cleat: XPEDO XPT (6° Float)
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep these pedals spinning smooth.
- Size: 110mm wide x 100mm long x 9mm high
- Spindle diameter: 9/16-inch
- Weight: 308 grams
$165.00
Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Aluminum
- Traction: 8 traction pins
- Spindle: Chromoly+
- Platform width: 83mm
- Weight (pedal): 247g
- Weight (pair + cleats): 550g
- Light included: Yes (x2)
- Light modes: 3 (steady/flash/flash eco)
- Battery Life: Up to 30h (flash eco)
- Light Output: 15 lumens
- Battery: Micro USB rechargeable (cable included)
- Charging time: 50 min
- Beam angle: 180°
$163.30
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow.
- 105x115mm pedal body
- 17mm concave foot bed
- Extruded 6061 aluminum body and 4140 chromoly steel axles
- High-load DU bushing and cartridge bearing
- 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired
- 9/16"
$150.00
PD-R7000 NEW
FEATURE
- Carbon fiber reinforced resin pedal body
- Wide contact area
- 265g/pr (25g/pr lighter than PD-5800)
BENEFIT
- Optimum power transfer
- Lightweight
- Aerodynamic image
- Color: CFRP
- Average weight: 265 g
- Road clearance: 31°
- Binding: Single Sided
- Cleat included: SM-SH11
- Optional cleat: SM-SH10 / SM-SH12
- Pedal Type: Road
- Reflector: SM-PD65
$145.00
- Pedal Weight: (pair) 377g
- Cleat Weight: (pair) 64g
- Size: 68 x 84 x 17 mm
- Body Material: aluminum extruded / CNC machined
- Spindle: CNC machined cr-moly
- Pedal Bearings: sealed bearings / IGUS bushings
- Cleat System: X1 / X1F (HT exclusive system)
- Pins: replaceable SP7 (M4 x 6mm) pins
$145.00
- Pedal Weight (pair): 377g
- Cleat Weight (pair): 64g
- Size: 68 x 84 x 17 mm
- Body Material: Aluminum extruded / CNC machined
- Spindle: CNC machined cr-moly
- Pedal Bearings: Sealed bearings / IGUS bushings
- Cleat System: X1 / X2 (HT exclusive system)
- Pins: replaceable SP7 (M4 x 6mm) pins
$145.00
- 2-sided clipless pedal ideal for BMX and gravity use
- SX features fixed front springs for unparalleled spring tension eliminating unclipping under maximum load
- Small platform extruded and CNC machined aluminum body
- Sealed 686zz bearing and IGUS
$145.00
With LOOK Activ Grip by Vibram and LOOK Vision In Lighting our Geo City Vision Grip is the ultimate urban pedal. Combining 24/7 LED safety, iconic mountain boot traction and MTB-toughness with Tour de France winning performance and unmatched personality, there’s no better place to put your feet for town and country riding.
- Technology: Flat pedals + LOOK Activ Grip by Vibram
- Body: Composite
- Traction: Vulcanized Rubber Activ Grip
- Spindle: Chromoly+
- Surface area: 107x103mm
- Weight (pedal): 290g
- Weight (pair): 580g
- Waterproofness: IPX 7 Waterproof rating
- Light included: Yes (x4)
- Light modes: 4 (steady/day flash/night flash/flash eco)
- Battery Life: Up to 20h (flash eco) - Auto stop/start system
- Light output: From 6 to 50 lumens
- Battery: Micro USB rechargeable (cable included)
- Charging time: 2h
- Beam angle: 180°
$145.00
The X-TRACK RACE CARBON pedals offer the best surface contact area-to-weight ratio, thanks to a carbon body design. The large surface area and shape also offers plenty of stability to ensure a consistent feeling pedal stroke.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Carbon
- Spindle: Chromoly+
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 175g
- Weight (pair + cleats): 400g
- Float angle: 6°
- Release angle: 13°
$137.00
Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Carbon
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 60mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 125g
- Weight (pair + cleats): 312g
$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel.
Specs:
Spindle material: Forged SCM 435 chromoly steel
Body material: Cast stainless steel
Wing material: 17-4PH stainless
Spring material: 300 series stainless steel
Release angle: 15° / 20°
Q-factor: 52mm
Inner bearing type: Igus LL-glide bearing
Outer bearing type: Enduro cartridge bearing
Cleat: Premium brass cleats with shims included
Weight: 280g per pair
Warranty: 5 years
$135.00
- Pedal Weight: (pair) 305g
- Cleat Weight: (pair) 64g
- Size: 56 x 41 x 17.5 mm
- Body Material: aluminum extruded / CNC machined
- Spindle: CNC machined cr-moly
- Pedal Bearings: sealed bearings / IGUS bushings
- Cleat System: X1E / X1 (HT exclusive system)
$135.00
Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release Angle: 13°
- Retention: 5-10
- Body: Aluminum
- Traction: 8 traction pins
- Spindle: Chromoly+
- Platform width: 83mm
- Weight (pedal): 233g
- Weight (pair + cleats): 521g
$135.00
Enduro riding is rough on all bike components, and pedals are often the first in the line of fire. The X-TRACK EN-RAGE PLUS pedal features a forged aluminum body for incredible strength. The pedals are SPD compatible and will confidence on the roughest trails thanks to a 13° disengagement angle.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Forged Aluminum
- Spindle: Chromoly+
- Platform area: 664mm²
- Platform width: 67mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 225g
- Weight (pair + cleats): 500g
- Float angle: 6°
- Release angle: 13°
$129.99
The Best Of Both Metals
The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up.
Surefooted As A Mule
You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need.
Your True Colors Shining Through
Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you.
Get Up Stand Up
Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):16.9
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 101 x 100
- Weight: 375g
$129.99
- Follows the evolution of modern trail bikes and all-mountain rigs, providing you a more sure-footed, durable pedal to match your single-track endeavors.
- Thin and lightweight
- Bottom loaded hex-head threaded pins (20x/pedal)
- Body: 15.5mm thick
- Platform: 110mm x 115mm
- Chromoly steel axle
- Bearing/bushing
- Internals are fully serviceable and replaceable
- 440g
$125.00
The GEO TREKKING VISION is the ultimate commuter pedal. Two different sides: one flat suitable for any shoes, and the other SPD-compatible for when you take things up a level. A removable light system adds that little extra security: ride to work in your suit and tie, ride home via the trails and side roads.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release Angle: 13°
- Retention: 5-10
- Body: Composite
- Traction: Composite studs
- Spindle: Chromoly+
- Platform width: 84mm
- Weight (pedal): 217g
- Weight (pair + cleats): 490g
- Light included: Yes (x2)
- Light modes: 3 (steady/flash/flash eco)
- Battery Life: Up to 30h (flash eco)
- Light Output: 15 lumens
- Battery: Micro USB rechargeable (cable included)
- Charging time: 50 min
- Beam angle: 180°
$124.99
The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021.
- Super slim 12mm for maximized pedal clearance
- CNC weight-optimized trail pedal at 360g per set
- Forged alloy body is shot-peened and anodized for increased durability
- Equipped with hollow taper Chromoly steel axles for unmatched strength
- Sealed bearings and IGUS bushings
- 18 preassembled pins in virtual concavity for ultimate grip
- Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike
- Crank boots compatible axle
$120.00
The MSW Judo Clipless Road Pedal achieves efficient power transfer through the stiffness of the carbon composite body to make your road ride less work and more fun. Yep.
- 52.5 mm chromoly spindle spins on a bushing & two cartridge bearings
- SPD-SL™ compatible
- 6° float cleats included
- Black
- Made in Hong Kong
$114.99
- Crank Boot Compatible Axles
- Full Anodized Finish
- 12mm Thin—Massive 11x11cm Platform
- Cold Forged Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Chamfered Side Edges for Improved Cornering Clearance
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- 18 Adjustable Pins per Pedal
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$111.00
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 50mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 130g
- Weight (pair + cleats): 328g
$106.00
- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents.
- TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast.
- The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 238g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$103.99
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability.
- 406 grams
- 9/16" axles
$100.00
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding.
- 310 grams (pair)
$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 355g per pair
- Warranty: 5 years
$99.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface.
Details
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable 8mm pins per side for grip
- 10mm pins available for purchase here
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Serviceable, pedal refresh kit available
Specs
- Adjustable pins: 10 per side
- Body Material: A380 Aluminum
- Endcap: T15
- Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large)
- Inner Bearing Type: Igus Bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Double Cartridge Bearing
- Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large)
- Spindle Material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 439g per pair (Small), 494g per pair (Large)
$99.00
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep these pedals spinning smooth.
- Size: 110mm wide x 100mm long x 18mm high
- Spindle diameter: 9/16-inch
- Weight: 352 grams"
$95.00
The X-TRACK RACE shares its design with the CARBON and Ti models, offering a composite body and Chromoly+ axle for optimal stiffness while riding. The SPD mechanism functions reliably even in the most extreme conditions, shedding mud and debris which may get caught under your shoes.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Composite
- Spindle: Chromoly+
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 182g
- Weight (pair + cleats): 415g
- Float angle: 6°
- Release angle: 13°
$90.00
Simple, yet highly efficient. The GEO TREKKING PEDAL is LOOK's two-sided commuter option, allowing you to choose between a ride to work or a quick training session.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Composite
- Traction: Composite studs
- Spindle: Chromoly+
- Platform width: 84mm
- Weight (pedal): 203g
- Weight (pair + cleats): 461g
$90.00
The GEO TREKKING GRIP pedals are ideal for commuting. Featuring a one-sided SPD-compatible mechanism, with a flat surface elastomer grip on the other, safe for riding in any conditions.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Composite / Elastomer bi-injection
- Traction: Elastomer bi-injection
- Spindle: Chromoly+
- Platform width: 86mm
- Weight (pedal): 228g
- Weight (pair + cleats): 511g
$90.00
The X-TRACK EN-RAGE is a sturdy pedal to accompany you on your favorite trail ride with varying terrain. The forged aluminum body is designed to resist extreme conditions and potential abuse from trail riding. The large contact area is perfect for riders looking for a comfortable width that offers security but also a surface contact-to-weight ratio which remains best in class for trail pedals.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Aluminum
- Spindle: Chromoly+
- Platform area: 545mm²
- Platform width: 63mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 210g
- Weight (pair + cleats): 470g
- Float angle: 6°
- Release angle: 13°
$90.00
- Built for everyday use and features a stainless steel top plate and a hollow, steel axle.
- A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal.
- The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$89.99
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: A380 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- cleat: premium brass cleats with shims included
- weight: 395g per pair
$89.99
Exceptional build quality for reliable performance. MSW dual-sided clipless Flash II Pedals incorporate a simple release mechanism with impressive foot support. The lightweight design reduces fatigue to extend your riding time. And isn’t that what it’s all about?
- Chromoly 9/16” spindle, bushing & bearing configuration
- SPD-compatible, 2-bolt cleats included, 4° float, 14.6° angle of release
- Dual-sided clipless, aluminum pedal body
- Adjustable spring tension with tension indicator
- Black
- Made in Taiwan
$89.99
There’s no need to choose between clipless performance and platform versatility with the MSW Flip II. Riders can go clipless on the commute or sport clogs on campus. Enhance your ride time with pedals that don’t set limits on your horizon.
- Wear 2-bolt style cycling shoes or casual flat shoes
- Single side clipless with platform
- Chromoly steel, 9/16” spindle, bushing & bearing configuration
- Spindle length: 58.5 mm
- SPD-compatible 2-bolt cleats included, 4° float, 14.6 angle of release
- Adjustable spring tension with tension indicator
- Aluminum pedal body
- Black
$85.00
The KEO CLASSIC 3 PLUS maintains the fast clip in / clip out with easy tension adjustment, and features stainless steel construction for optimized pedal stiffness and transfer of power, and increased protection against wear.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly
- Platform Material: Stainless Steel
- Platform area: 400mm²
- Platform width: 60mm
- Q Factor: 53mm
- Stack height + cleats: 17.8mm (11.5 + 6.3mm)
- Weight (pedal): 140g
- Weight (pair + cleats): 350g
Page 1 of 3
Next page