Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. - Tire studs sold separately - POM-injected handle - Stainless steel barrel - Thumb and index finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
$64.00
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$6.99
- For use on 8-key single speed freewheels - Tool Type: Freewheel Remover - Compatibility: 16-22T smallest cog (Gray) - Compatibility: 13-14T smallest cog (Silver)
$3.99 - $20.99
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
$12.99 - $39.99
Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.
$47.00
- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups - Allows use of a Torque wrench to obtain proper torque specifications
$272.00
- 11 speed compatible - Allows removal, installation and peening of rivets
$17.50
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$23.00 - $35.00
Headset cup installation adapters allow for precise installation of Cane Creek headsets and prevent damage to both the cups and press. - Precision engineered in Fletcher, NC - One side can be used with cups featuring non-removable bearings (pressure is applied precisely on the outer race, preserving the integrity of the bearing itself), while the other is used for cups featuring removable bearings (pressure is applied to the cup race via a chamfered surface, reducing the risk of slippage) - Hard anodized AL7075 to reduce wear - Intended to be used in concert with a headset press tool to install any press-fit headset configuration
$49.99
Service kit for Cane Creek suspension forks.
$17.00
Fix it fast. Light, pocket-sized tire levers with a hybrid construction of an aluminum core encased around a nylon outer are tough but safe for carbon rims. Where it thrives: On the bike, in the garage What it's built for: Fixing, durability Highlights: - Quality, forged aluminum core for strength, perfect for tight fitting tire-and-rim combos - Reinforced nylon outer protects the most valuable rims - Easy tire removal – with integrated spoke hook
$25.00
Fix it fast. Fits perfectly in your Scalpel Stash kit or a pocket, and contains ten hand-picked tools that assist in all but the least common bike adjustments. Where it thrives: On the bike, challenging trails, the open road What it's built for: Fixing, durability Highlights: - Contains: Hex Keys 2 | 2.5 | 3 | 4 | 5 | 6 | 8mm | Torx T25 | Phillips #2 | Valve Core Tool - Hardened tools with an anti-corrosive coating and robust aluminum side bars - Compatible with 2021+ Scalpel STASH Kit
$75.00
Onboard mechanic. For rapid repairs, the STASH system holds a quick-draw Cannondale 10-in-1 mini tool, CO2 inflator spacer and tire plug kit beneath the water bottle. Where it thrives: On the bike, challenging trails What it's built for: Versatility, convenience Highlights: - Fastest access to tools during riding or racing - Compatible with 2021+ Scalpel - Includes holder, Dynaplug, multi-tool and CO2 spacer
$31.00
Service tools to ensure long-term success of Chris King hubs. - For use in bearing preload adjustments on all Chris King front and rear hubs
$203.04
Service tools to ensure long-term success of Chris King hubs. - For intensive servicing of Ringdrive system found in most Chris King rear hubs - Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual - Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs
$14.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime
$19.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
$29.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
$33.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
$39.99
The ultimate trail-side companion. Details - 20 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Chain Tool: 8/9/10/11/12 speed compatible - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Open Wrench: 8mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener - Spoke Wrench: #0, 1, 2 - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 203g
$42.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - 8-12 speed chain tool is incorporated into the case - Spoke wrench : #0, 1, 2 & 3 - Magnetized storage case can be used as a handle for extra leverage
$20.00
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel. - Rubberized ergonomic handle - Unique "thumb flange" makes it easy to apply pressure to the tire bead - Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims - Lifetime warranty
$120.00
The Ultimate Tire Lever. The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel. Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use Unique “thumb flange” makes it easy to apply pressure to the tire bead Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims
$17.50
- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Red handle for 0.8-1.0mm spokes - Black handle for 1.0-1.3mm spokes
$17.60
Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs
$18.30
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Multi-tool for DT aero spokes, torx, and square nipples
$36.50
Tools for working with DT Swiss spokes. - Punch with concave head - Improves seating of the spoke head in the hub flange
$39.30
Spoke Ruler
$54.00
Guide tool for starting nipples in deep/aero rims.
Page 1 of 29 Next page